WAGO Terminal Blocks and Connectors
Terminal Blocks and Connectors
From the original WAGO 273 Series PUSH WIRE® connector for junction boxes to the WINSTA® connectors for the building installation, WAGO offers a comprehensive range of electrical interconnection products based on innovative Spring Pressure Termination Technology. Only these clamping and connecting systems can guarantee proper functioning and 100% reliability – and that all without any maintenance.
Power Supply Connectors for Lighting and Equipment – The Push-in CAGE CLAMP® connection used here allows solid, stranded and fine-stranded conductors to be connected without any preliminary preparation of the conductor (ultrasonic compression, ferrules, etc.). If required, the connectors can be retrofitted with a strain relief plate. As an option, a direct PE (ground) contact is located beneath the connector; this can be used to integrate the metallic enclosure of the connector into the protective system directly on installation of the connector. The internal connection end is equipped with a fully functional third contact for each pole for a cross section range of 0.5 to 0.75 mm². The corresponding PE pole can accommodate an external PE (ground) contact.
Installation Connectors – This WAGO COMPACT PUSH WIRE® connector for junction boxes is up to 63 % smaller than other junction box connectors available on the market at present and offers you even more safety functions. The 221 Series COMPACT Splicing Connector for all wire types is WAGO’s latest innovation: It is up to 40 % smaller, features additional safety functions via transparent housing and is easier to use. The 221 Series COMPACT Splicing Connector for all wire types is WAGO’s latest innovation: It is up to 40 % smaller, features additional safety functions via transparent housing and is easier to use.
Modular Terminal Blocks and Terminal Strips for Surface Mounting – WAGO chassis-mount terminal strips as well as modular terminal blocks and compact block terminal strips meet the toughest demands posed by flexible installation, versatile electrical connection options and easy handling.
Capacitor and Ballast (Choke) Terminal Blocks – All terminal blocks shown on this page are only examples for a variety of individual variants. WAGO, the market leader in this sector, will submit an offer for a ballast (choke) terminal block or tailor-made capacitor cover for your specific application.
Transformer Terminal Blocks – WAGO transformer terminal blocks available with either CAGE CLAMP® or screw clamp connection, or as fuse terminal blocks with screw connection. Transformer terminal blocks with CAGE CLAMP® connection enable fast wiring through direct contact with the varnished coil wires in the IDC contacts.
Accessories – Accessories for compact splicing connectors. WAGO has an extensive range of accessories for compact splicing connectors:
- Marking accessories and devices
- Wire and cable marking
- Operating levers
- Strain relief
- Mounting carrier
- and much more…